Heat pumps are now the most common way to replace oil boilers or electric heating. They work well in many existing houses too, but perform best when system and building are planned together.
The temperature you need
A heat pump is more efficient the lower the temperature of the water it sends to the radiators or underfloor heating. Well-insulated houses with underfloor heating are the ideal case; with old radiators and uninsulated walls a high temperature may be needed, and efficiency drops.
- Check whether the existing radiators are enough at a lower temperature
- Consider insulating the roof or replacing windows first
- Size the system on actual consumption, not on the old boiler
Air, ground or water
Air-to-water heat pumps are the easiest to install. Ground-source systems with boreholes cost more up front but perform more steadily in winter, and need specific permits. The choice depends on the ground, the space and the budget.
Position and noise
The outdoor unit of an air-to-water heat pump makes noise: it must be placed with care in relation to bedrooms and neighbours, in line with noise regulations. Appearance matters too, especially in historic village centres.
Before winter, but without rushing
September is when many people realise the boiler will not last another winter. A renewable heating consultation, free for owners, helps you decide well even when time is short. And subsidies must be requested before ordering the system.